Design and Implement Azure Load Balancer Using the Azure Portal - Training
-
Load balance non-HTTP(S) traffic in Azure
- Introduction 2 min : Completed
- Explore load balancing 6 min : Completed
- Design and implement Azure load balancer using the Azure portal 17 min : Completed
- Exercise: Create and configure an Azure load balancer 15 min : Completed
- Explore Azure Traffic Manager 14 min : Completed
- Exercise: Create a Traffic Manager profile using the Azure portal 7 min : Completed
- Summary 1 min : Completed
Achievements
Completed 200 XP
Azure Load Balancer operates at layer 4 of the Open Systems Interconnection (OSI) model. It's the single point of contact for clients. Azure Load Balancer distributes inbound flows that arrive at the load balancer's front end to backend pool instances. These flows are according to configured load-balancing rules and health probes. The backend pool instances can be Azure Virtual Machines or instances in a virtual machine scale set.
Choosing a load balancer type
Load balancers can be public (also known as external) or internal (also known as private).
A public load balancer can provide outbound connections for virtual machines (VMs) inside your virtual network. These connections are accomplished by translating their private IP addresses to public IP addresses. External load balancers are used to distribute client traffic from the internet across your VMs. That internet traffic might come from web browsers, module apps, or other sources.
An internal load balancer is used where private IPs are needed at the frontend only. Internal load balancers are used to load balance traffic from internal Azure resources to other Azure resources inside a virtual network. A load balancer frontend can also be accessed from an on-premises network in a hybrid scenario.
Azure load balancer and availability zones
Azure services that support availability zones fall into three categories:
- Zonal services: Resources can be pinned to a specific zone. For example, virtual machines, managed disks, or standard IP addresses can be pinned to a specific zone, which allows for increased resilience by having one or more instances of resources spread across zones.
- Zone-redundant services: Resources are replicated or distributed across zones automatically. Azure replicates the data across three zones so that a zone failure doesn't impact its availability.
- Non-regional services: Services are always available from Azure geographies and are resilient to zone-wide outages and region-wide outages.
Azure Load Balancer supports availability zones scenarios. You can use Standard Load Balancer to increase availability throughout your scenario by aligning resources with, and distribution across zones. Review this document to understand these concepts and fundamental scenario design guidance.
A Load Balancer can either be zone redundant, zonal, or non-zonal. To configure the zone related properties (mentioned above) for your load balancer, select the appropriate type of frontend needed.
Zone redundant
In a region with Availability Zones, a Standard Load Balancer can be zone-redundant. This traffic is served by a single IP address.
A single frontend IP address survives zone failure. The frontend IP may be used to reach all (non-impacted) backend pool members no matter the zone. One or more availability zones can fail and the data path survives as long as one zone in the region remains healthy.
The frontend's IP address is served simultaneously by multiple independent infrastructure deployments in multiple availability zones. Any retries or reestablishment succeed in other zones not affected by the zone failure.
Zonal
You can choose to have a frontend guaranteed to a single zone, which is known as a zonal. This scenario means any inbound or outbound flow is served by a single zone in a region. Your frontend shares fate with the health of the zone. The data path is unaffected by failures in zones other than where it was guaranteed. You can use zonal frontends to expose an IP address per Availability Zone.
Additionally, the use of zonal frontends directly for load balanced endpoints within each zone is supported. You can use this configuration to expose per zone load-balanced endpoints to individually monitor each zone. For public endpoints, you can integrate them with a DNS load-balancing product like Traffic Manager and use a single DNS name.
For a public load balancer frontend, you add a zones parameter to the public IP. This public IP is referenced by the frontend IP configuration used by the respective rule.
For an internal load balancer frontend, add a zones parameter to the internal load balancer frontend IP configuration. A zonal frontend guarantees an IP address in a subnet to a specific zone.
Selecting an Azure load balancer SKU
Two SKUs are available when you create a load balancer in Azure: Basic load balancers and Standard load balancers. These SKUs differ in terms of their scenario scope and scale, features, and cost. Any scenario that is possible with the Basic load balancer can also be created with the Standard load balancer.
To compare and understand the differences, review the table below.
Features
Standard Load Balancer
Basic Load Balancer
Backend pool size
Supports up to 1000 instances.
Supports up to 300 instances.
Backend pool endpoints
Any virtual machines or virtual machine scale sets in a single virtual network.
Virtual machines in a single availability set or virtual machine scale set.
Health probes
TCP, HTTP, HTTPS
TCP, HTTP
Health probe down behavior
TCP connections stay alive on an instance probe down and on all probes down.
TCP connections stay alive on an instance probe down. All TCP connections end when all probes are down.
Availability Zones
Zone-redundant and zonal frontends for inbound and outbound traffic.
Not available
Diagnostics
Azure Monitor multi-dimensional metrics
HA Ports
Available for Internal Load Balancer
Not available
Secure by default
Closed to inbound flows unless allowed by a network security group. Internal traffic from the virtual network to the internal load balancer is allowed.
Open by default. Network security group optional.
Outbound Rules
Declarative outbound NAT configuration
Not available
TCP Reset on Idle
Available on any rule
Not available
Multiple front ends
Inbound and outbound
Inbound only
Management Operations
Most operations < 30 seconds
60-90+ seconds typical
SLA
Not available
Microsoft recommends Standard load balancer. Standalone VMs, availability sets, and virtual machine scale sets can be connected to only one SKU, never both. Load balancer and the public IP address SKU must match when you use them with public IP addresses.
SKUs aren't mutable; therefore, you cannot change the SKU of an existing resource.
Creating and configuring an Azure load balancer
There are several tasks you need to perform to successfully create and configure an Azure Load Balancer.
Create the load balancer
In this example, we're looking at the tasks required to create and configure a Public (external) load balancer in a Standard SKU. The first task is to create the load balancer itself. During the creation process, a frontend IP configuration is created and a public IP address is assigned. You can also add a backend pool, create a health probe, and add load balancing rules during the creation process, but we add these components later in the process.
From the Azure portal home page, navigate to the Global Search bar and search Load Balancer then select Load balancers.
Choose + Create or Create load balancer to start the process.
On the Create load balancer page, you must supply the following required information on the Basics tab:
| Setting | Value |
|---|---|
| Subscription | Select the Azure subscription that you want to create your new load balancer resource in. |
| Resource group | Here you can select an existing resource group or create a new one. |
| Name | Provide a unique name for the instance. |
| Region | Select the region where the virtual machines were created. |
| Type | This is where you select whether your load balancer is going to be Internal (private) or Public (external). If you choose Internal, you need to specify a virtual network and IP address assignment, but if you choose Public, you need to specify several Public IP address details. |
| SKU | Here you can select either the Standard SKU or the Basic SKU (for production workloads you should choose Standard, but for testing and evaluation and training purposes, you could choose Basic, but you won't get all the possible load balancer features). Depending on which SKU you select here, the remaining configuration options differ slightly. |
| Tier | This is where you select whether your load balancer is balancing within a region (Regional) or across regions (Global) - If you select the Basic SKU above, this setting is greyed out. |
After you select Next: Frontend IP configuration, select + Add frontend IP address to add a public IP address for your public-facing front-end. You add a name for the frontend IP configuration, choose IP version and IP type, then add a Public IP Address. You can create a new public IP address for your public-facing front-end, or use an existing one. When creating a new public IP address, you specify the name and you also specify a name for your public IP address, and whether to use a dynamic or statically assigned IP address. You can optionally also assign an IPv6 address to your load balancer in addition to the default IPv4 one.
Once completed with the frontend IP configuration, select Review + Create, where the configuration settings for the new load balancer resource will be validated, and then you can select Create to deploy the resource.
The resource starts to be deployed.
When it completes, you can select Go to resource to view the new load balancer resource in the portal.
Add a backend pool
The next task is to create a backend pool in the load balancer and then adds your virtual machines to it.
From the Load balancer Overview page for your load balancer, select Backend pools under Settings and select + Add.
You need to enter the following information on the Add backend pool page:
| Setting | Value |
|---|---|
| Name | Enter a unique name for the backend pool. |
| Virtual network | Select the name of the virtual network where the resources are located that you're adding to the backend pool. |
| Backend Pool Configuration | Select whether you want to associate the backend pool using the NIC or IP address of a resource. |
You could add existing virtual machines to the backend pool at this point, or you can create and add them later. You then select Save to add the backend pool.
Add virtual machines to the backend pool
The next task is to add the virtual machines to the existing back-end pool.
On the Backend pools page, select the backend pool from the list.
You need to enter the following information to add the virtual machines to the backend pool:
| Setting | Value |
|---|---|
| Virtual network | Specify the name of the virtual network where the resources are located that you're adding to the backend pool. |
| Backend Pool Configuration | Select whether you want to associate the backend pool using the NIC or IP address of a resource. |
Then under the IP configurations section, select + Add.
Select the virtual machines you want to add to the backend pool and select Add.
Then select Save to add them to the backend pool.
Add health probes
The next task is to create a health probe to monitor the virtual machines in the back-end pool.
On the Backend pools page of the load balancer, select Health probes under Settings, and then select + Add.
You need to enter the following information on the Add health probe page:
| Setting | Value |
|---|---|
| Name | Enter a unique name for the health probe. |
| Protocol | Select either TCP, HTTP, or HTTPS. |
| Port | Specify the destination port number for the health signal. The default is port 80. |
| Interval (seconds) | Specify the interval time in seconds between probe attempts. The default is 5 seconds. |
You then select Save to add the health probe.
Add a load balancer rule
The last task is to create a load balancing rule for the load balancer. A load balancing rule distributes incoming traffic that is sent to a selected IP address and port combination across a group of backend pool instances. Only backend instances that the health probe considers healthy receive new traffic.
On the Health probes page of the load balancer, select Load balancing rules under Settings, and then select + Add.
You need to enter the following information on the Add load balancing rule page:
| Setting | Value |
|---|---|
| Name | Enter a unique name for the load balancing rule. |
| IP Version | Select either IPv4 or IPv6. |
| Frontend IP address | Select the existing public-facing IP address of the load balancer. |
| Backend pool | Select an existing backend pool. The virtual machines in this backend pool are the target for the load balanced traffic of this rule. |
| Protocol | Select either the TCP or UDP protocol. |
| Port | Specify the port number for the load balancing rule. The default is port 80. |
| Backend port | You can choose to route traffic to the virtual machine in the backend pool using a different port than the one that clients use by default to communicate with the load balancer (port 80). |
| Health probe | Select an existing health probe or create a new one. The load balancing rule uses the health probe to determine which virtual machines in the backend pool are healthy and therefore can receive load balanced traffic. |
| Session persistence | You can choose None, or Client IP, or Client IP and protocol. Session persistence specifies that traffic from a client should be handled by the same virtual machine in the backend pool for the duration of a session. None specifies that successive requests from the same client may be handled by any virtual machine. Client IP specifies that successive requests from the same client IP address will be handled by the same virtual machine. Client IP and protocol specifies that successive requests from the same client IP address and protocol combination will be handled by the same virtual machine. |
| Idle timeout (minutes) | Specify the time to keep a TCP or HTTP connection open without relying on clients to send keep-alive messages. The default idle timeout is 4 minutes, which is also the minimum setting. The maximum setting is 30 minutes. |
| Enable TCP Reset | Choose between Disabled or Enabled. With TCP Reset on Idle set to Disabled, Azure doesn't send a TCP reset packet when the idle timeout period is reached. With TCP Reset on Idle set to Enabled, Azure sends a TCP reset packet when the idle timeout period is reached. |
| Enable Floating IP | Choose between Disabled or Enabled. With Floating IP set to Disabled, Azure exposes a traditional load balancing IP address mapping scheme for ease of use (the VM instances' IP). With Floating IP set to Enabled, it changes the IP address mapping to the Frontend IP of the load balancer to allow for more flexibility. |
| Outbound source network address translation (SNAT) | Choose between Disabled or Enabled. With Outbound SNAT set to Disabled, Azure doesn't translate the source IP address of outbound flows to public IP addresses. With Outbound SNAT set to Enabled, Azure translates the source IP address of outbound flows to public IP addresses. |
Test the load balancer
Having completed the various tasks to create and configure your public load balancer and its components, you should then test your configuration to ensure it works successfully. The simplest way to do this is to copy the Public IP Address from the public load balancer resource you created and paste it into a web browser. You should receive a response from one of the VMs in your load balancer. You could then stop whichever VM randomly responds, and once that VM has stopped, refresh the browser page to verify that you receive a response from the other VM in the load balancer instead.
Check your knowledge
Which of the following statement about external load balancers is correct?
They have a public IP address.
They don't have a listener IP address.
They have a private, front-facing IP address.
When deploying a new Azure Load Balancer that must support outbound traffic rules. Which SKU should be selected?
Standard
Basic
Either Standard or Basic
You must answer all questions before checking your work.